Dynalink RTA1030W Guide d'installation télécharger pdf (Page 19)

Default Configuration

This router is shipped with the following factory default settings depending on

your region.

Router IP address 192.168.1.1

Subnet mask 255.255.255.0

VPI/VCI 8/35 (Australia)

0/100 (New Zealand)

Connect mode PPPoE LLC/SNAP (Australia)

PPPoA VC-MUX (New Zealand)

NAT enabled

DSL line mode ADSL2+ (Australia)

G.DMT (New Zealand)

WAN IP dynamic

DHCP enabled

DNS relay on

UPnP IGD enabled

Firewall

Incoming requests blocked

Outgoing traffic not blocked

Configuration & management:

User name admin

Password admin

Telnet password admin

Wireless Settings (not applicable to model RTA1320):

Wireless Channel 11

Wireless security disabled

VoIP settings (RTA1046VW only):

Default SIP port TCP 5060

Default CODEC Auto switching (G.711, G.726, G.729)

1 2 ... 14 15 16 17 18 19 20

Pas de commentaire

Dynalink RTA1030W Guide d'installation Page 19